Ceiling installation

Depending on the project design, there are different ways of installing Soft Cells in the ceiling, all of which allow for quick and easy fitting.


Magnets allow panels to be dismantles without tools. Suitable for installation on walls and ceilings.  

pot magnet, steel
Overall depth of the panels from the face of the installation surface
55 mm


For ceiling mounting where a suspended ceiling is required.

stainless steel wire  
Minimum dimension of the front side of the panel to the installation surface 
120 mm

Hinged push/latch

If subsequent access is required behind the panel, Soft Cells should be mounted with hinge/push latch.

Dimensions from the front side of the Soft Cells to the installation brackets 
55 mm

CE marking and DoP

Kvadrat Soft Cells comply with the EU-harmonised product standard for suspended ceilings (EN-13964). 
If a product is covered by an EU-harmonised product standard, CE-marking of the product is mandatory for marketing in the entire EU. Compliance is expressed through a Declaration of Performance (DoP) corresponding to a specific product or a product group.

The Declaration of Performance (DoP) is the key concept in the EU Construction Products Regulation (CPR) effective from July 1st 2013. The DoP gives the manufacturer the opportunity to deliver the information about the essential characteristics (mandatory and optional) of the product he wants to deliver to the market. By drawing up a DoP the manufacturer assumes the responsibility for the conformity of the construction product with the declared performance.